Orient Technologies BTP-2002NP Manual de instalación descargar pdf (Pagina 11)

BTP-2002NP Installation manual

- 8 -

USB interface

Pin Number Signal Name Function

1 VBUS +5V

2 DATA- Printer data transmit line minus

3 DATA+ Printer data transmit line plus

4 GND Ground

2.2.2 Cash Drawer Connector

The drawer kick-out drive pulses are generated by command. The host can

retrieve the status of the drawer by using the DLE EOT, GS a, or GS r

commands.

1) Pin assignments:

Pin Number Signal Name Function

1 Frame GND --

2 Drawer kick-out drive signal 1 Output Data

3 Drawer open/close signal Input Data

4 +24 V --

5 Drawer kick-out drive signal 2 Output Data

6 Signal GND --

2) Connector model:

Printer side: DuoYuan DY126-6P6C or equivalent

User side: 6-position 6-contact (RJ11 telephone jack)

3) Drawer kick-out drive signal

Output signal: Output voltage: Approximately 24V

Output current: 1A or less

2.3 Loading the Paper Roll

Note: Be sure to use paper rolls that meet the specifications. Do not use paper

rolls that have the paper glued to the core because the printer cannot

detect the paper end correctly. (Turn off power switch).

1) Turn off the printer.

2) Open the printer top cover, as in following figure.

3) Put the paper roll into the paper holder. See figure below.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sin comentarios

Orient Technologies BTP-2002NP Manual de instalación Pagina 11